Speedway Motors Zinc Plated Drop Steering Arms with 3-3/4 Inch Drop Compitable with 1937-48 Ford, Forged Steel Arms Fit 1937-48 Ford Spindles for Spring-Over Front Axle

These forged steel steering arms will attach to all 1937-48Compatible with Ford spindles but their greater drop, 3-3/4" from spindle mount holes means they work best on 1935-48Compatible with Ford cars (with spring-over front axle). Clears most radius rods and wishbones. These steering arms accept 11/16"Compatible with Ford 7 degree "tapered" tie rod ends (both the top and bottom are tapered to allow tie rods to mount above or below arm as needed). You can drill-through with a 5/8" bit to use spherical rod ends. Use a 46" eye-to-eye tie rod link when used with a 48" wide axle withCompatible with Ford spindles.

• 3-3/4 Inch Drop Design — Provides added clearance for radius rods and wishbones on spring-over front axle setups commonly used on early Compatible with Ford builds.
• 1937–48 Compatible with Ford Compatibility — Designed to bolt directly to all 1937–1948 Compatible with Ford spindles, allowing use of common spindles and traditional front-end components.
• Forged Steel Construction — Heavy-duty forged steel arms deliver strength and durability for street-driven hot rods and classic chassis builds.
• Tie Rod End Versatility — Accepts 11/16" Compatible with Ford 7-degree tapered tie rod ends and can be drilled to 5/8" for use with spherical rod ends if desired.
• Dual-Sided Tapered Mounting — Top and bottom tapers allow tie rod placement above or below the arm to achieve proper steering geometry and clearance.